Motherboard Lcd Tested
Check out this page if you are looking for Motherboard Lcd Tested
 |
US $74.26
 |
Intel Core 2 Quad Q6600 Processor 2.40 GHz CPU Speed 8 MB L2 Cache 1066 MHz Bus Speed
List Price:  |
DescriptionProcessor Specifications: SSpec Number: SL9UM. CPU Speed: 2.40 GHz. PCG: 05B. Bus Speed: 1066 MHz. Bus/Core Ratio: 9. L2 Cache Size: 8 MB. L2 Cache Speed: 2.40 GHz. Package Type: LGA775. Manufacturing Technology: 65 nm... |
 |
Intel Pentium4 Replacement Processor 820 2.8ghz Includes Fan / Heatsink With Thermal Compound
List Price: |
Description2.8GHz Pentium 4 processor with heatsink and fan is a dual core processor is great for replacing that worn out or damaged Pentium 4 processor in an otherwise working computer. |
 |
LCD Flex Cable for HTC My Touch 3G Slide
Sale Price: $11.26 |
DescriptionThis ribbon connects the LCD Screen & the main motherboard together. It may helps you to repair your phone with following common faults: |
 |
Slide Flex Cable for Motorola Droid A855
Sale Price: $17.25 |
DescriptionThis ribbon connects the LCD Screen & the main motherboard together. It may helps you to repair your phone with following common faults: |
 |
Keypad Flex Cable for HTC Incredible S S710E
Sale Price: $10.78 |
DescriptionThis ribbon connects the LCD Screen & the main motherboard together. It may helps you to repair your phone with following common faults: |
PC Issue: Is my motherboard fried?
(My Rig: AMD64 3500+, 6800GT 256MB AGP, 2G PC3200 SDRAM, MSI Neo Plat MoBo, 650W PSU)
When turning my PC on, only the fans and LCD Temperature Reader work. There are no beeps to tell me what is wrong. I removed the 2G RAM to see if that would change anything ... still no warning beeps. I had a few bent pins on my 3500+ processor which I think I fried also (didn't use heatsink fan on a 2 second plug-in to see if it would run, also the platic case where the CPU sits is damaged, it's in two pieces) ... Is my motherboard fried? Is it safe to order a mobo through e-bay or would I be better purchasing a new PC?
The fan on my GPU still spins so is it safe to assume the Graphics Card is still good? And on the RAM, I'll likely take it somewhere early next week to have them tested to see if they are still useable.
Any advice you can give me on testing the motherboard with what's been stated above to see if it works?
What did you do, take a hammer to it.
Yes your mboard is fried and so it your CPU and hopefully nothing else.
Try here: http://www.komplett.co.uk/k/kc.aspx?bn=10293
If you wish to use your memory again and your graphics card just remember to check that the mboard can accommodate them.
Comments