Touch Backli
Check out this page if you are looking for Touch Backli
 |
No items matching your keywords were found.
Touch-Screen Use And Maintenance Of Attention
Touch-screen use and maintenance affect the life of touch screens, we will use and maintenance of a number of touch-screen process should pay attention to matters of the list, hoping to be helpful to everyone. For the Touch Screen you want to know what problems can be in this message, we will conduct a professional answer.
One, touch-screen product
1, touch-screen membrane surface to touch the surface, that is, a positive product; glass surface a non-touch surface, that is, products on the back.
2, touch-screen part of the glass products, glass corner than the sharp in the assembly with gloves (finger) operations.
3, touch-screen part of the fragile glass materials, assembly not to exert great efforts to impact touch-screen.
4, to avoid direct take lead pick up the touch screen, to avoid pinout positions are pulling action.
5, pinout strengthen the board positions can not be bending action.
6, pinout does not allow any part of fold phenomenon, the assembly process of bending radius to be R> 1.5mm.
7, pinout in the assembly, it should be the level of insertion, not in strengthening the roots of the folded plate inserted.
8, pick and place products to be single operation, light-light, to avoid the collision between product surface scratches.
9, surface cleaning products, please use the soft cloth (chamois) dipped in petroleum ether wiping.
10, not use organic solvent wipe with a corrosive touch-screen film. Such as: wiping machine water, industrial alcohol.
11, wiping finger touch screen, please follow the direction of finger wipe, horizontal wipe can not cheat site.
12, Do not stack to place touch-screen.
13, in the assembly design and frame design, please note the following.
13.1 fixed the border of the pillars of touch screen touch screen must be outside the visible area.
13.2 frame edge to the touch screen operating area outside the frame edge areas to operate in the visible range can not have pressure to move.
13.3 The proposed fixed-touch screen materials for plastic materials, contact with the front part of the touch-screen pad of soft material.
13.4 Do not use with corrosive adhesive affixed to the touch screen surface.
2, touch screen routine maintenance
Due to technical limitations and poor ability to adapt to the environment, it is also touch-screen machines with the ordinary, like the need for regular maintenance. And because a variety of electrical equipment touch screen is a highly integrated touch one machine, so the use and maintenance should pay attention to the following questions.
A day in the boot before the 10.4 Inch Touch screen Monitor with a dry cloth.
2, or drink water droplets fall on the screen, make the software to stop responding, this is because the water droplets and fingers have similar characteristics, need to wipe the water droplets.
3, touch-screen controller can automatically determine the dust, but dust will reduce the touch screen too sensitive, simply wipe with a dry cloth to clean the screen.
4, the application on the touch screen glass cleaner clean dirty and greasy fingerprints.
5, in strict accordance with a point of order, off the power, that is, turn the power on the order are: display, sound, host. Turn off the power for the opposite order.
6, produces a large number of temporary files on your hard disk, if the current breakpoint or not to withdraw from directly shut down Windows, and soon will lead to hard disk for errors. Therefore, the need to periodically run the ScanDisk scans the hard disk error, the application the best way to set up a secret exit the application and Windows re-power, for example: four corners according to regulations about the order of points.
7, the pure touch-screen procedure does not require the mouse cursor, the cursor will only allow users to lack of concentration.
8, should choose the most adequate application uses a simple anti-mouse model, because of the complex models need to sacrifice latency and system resources.
9, in Windows, start the slower application, users have access to other systems. The solution is to modify the SYSTEM. INI file: The shell = progman. exe (Windows3.x) or the shell = Explorer. exe (Windows 95 on) directly instead. exe file. However, the application should be able to directly withdraw from Windows, otherwise the system can not quit.
10, depending on the deteriorating environmental conditions, regular open nose clean touch-screen, and the inner surface of the reflective stripes. Concrete method is: Open the cover on both sides of the machine, you can find the release latch to hold back the front nose of the authorities to open the body can release the latch. Lift the front of the nose, you can see 7 Inch Touch Screen LCD control card, unplug the touch screen cable to the back head can be removed nose and touch screen. Look carefully at a fixed touch-screen method, remove the touch-screen cleaning, careful not to use the cardboard or hard cloth, do not scratch the reflective stripes. Finally, press the opposite order and recover the original structure will be the nose.
About the Author
the latest consumer electronics news present here is helpful to all of you,digital frame ,MP5 Player ,Touch Screen , Solar charger accessories ,electronic picture frames ,TFT Monitor ,recording pen,Mini Flashlight,Digital Watches,Electronic Cigarette, LCD and PC accessories. It does not matter how many items you will care, because they are all useful tips.
Comments